Page 1 of 1

Creamed Honey

Posted: Fri Nov 12, 2010 8:24 am
by mmclauchlin
Where can I buy some good quality local creamed honey? I plan on using the creamed honey as starter for making my own supply?

Posted: Fri Nov 12, 2010 9:11 am
by Wally
I have seen it at the Sandy Ridge Farmers market. I have never tried it. Don't know where it came from or how good it is.

Posted: Fri Dec 17, 2010 12:31 pm
by mike91553
Brushy Mnt sells a 12 oz. container of creamed honey. Although its clover and not local if you use 10% mixed with your honey and use that to start your 2nd batch it will be 99% your honey.

I started a batch today and it blended up pretty.

Creamed honey

Posted: Wed Feb 09, 2011 5:21 pm
by mike91553
My creamed honey turned out great, very smooth and firm. The clover flavor really overpowers the natural flavors in my honey but not nearly as bad in the 2nd batch. It is still very good anyway even though the seed honey changed my flavor more than I was expecting.

Re: Creamed Honey

Posted: Sat Jul 23, 2011 12:04 pm
by dhamiltn
Mike, I'm thinking about making one or two gallons of creamed honey this year. It looks like I just need to get the honey to 95-100 degrees, then stir in the seed (being careful not to introduce too much air in the process), and then let sit for a few days until it's ready to be jarred. However, if you wait too long to jar it, it gets too firm and may have to be melted again.

If you have any further advice on the process, please let me know.

Re: Creamed Honey

Posted: Sat Jul 23, 2011 6:41 pm
by mike91553
That sounds about right but be careful with the heat or you could turn it all back to liquid honey. I think different types of honeys have a different temperature that they turn back liquid and I wouldn't risk going to 95. The ideal temperature for it to set up is around 58 degrees F.

Re: Creamed Honey

Posted: Sat Jul 23, 2011 7:44 pm
by dhamiltn
the logic appears to be that 95 deg F is high enough to melt any existing crystals, and that adding the seed will bring the temp down cool enough to prevent melting. i'll give it a go and report results.